TWI Training Coordinator
SGS Inspection Services Saudi Arabia Ltd.
P.O. Box 30794
Al Khobar 31952
Mobile: +966 3 8172080 Ext. 112
Mobile: + 966 50 683 5930
Mobile: +973 39115450
Fax: +966 3 8173623
E-mail : email@example.com
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of babu k
Sent: Sunday, February 01, 2009 2:28 PM
Subject: [MW:1488] Re: 1474] Re: Required API 650 personal for Bahrain
Every one, Please send me if you have any power point presentation on API 653 Course, and model question itf you have.
On Wed, Jan 28, 2009 at 11:07 AM, Rajak, Sanjib (Bantrel Constructors) <RajakS@bantrelconstructors.com> wrote:
All info is available at api website
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of G Padmanabhan
Sent: January 27, 2009 10:06 AM
Subject: [MW:1474] Re: Required API 650 personal for Bahrain
Where we can take API Training course in India.
On Tue, Jan 27, 2009 at 7:37 AM, SHRIRAM PURANIK <firstname.lastname@example.org> wrote:
There is as such no API 650 qualification. Its API 653. You can search list of qualified persons on www.api.org
Shriram T Puranik
API 510, 570, 571, 577, 580, 653
On Mon, Jan 26, 2009 at 6:06 PM, Rajesh Shetty <email@example.com> wrote:
Anybody knows person having API 650 qualifications ready to give service a company in Bahrain, for a short period?
Please send details if you know somebody
With Best Regards
On Sat, Jan 24, 2009 at 3:58 PM, Ravi Ronanki <firstname.lastname@example.org> wrote:
Kindly let me know from which website or blogspot the fabrication tolerances for Pressure Parts and Structural Items can free downloads be available.
The matter is urgent.
On 1/22/09, Charles Nelson II <email@example.com> wrote:
In response to your question below, X-ray radiography is you best choice due to quality issues.
The second question is slightly difficult to answer as each tube/generator has different characteristics, as also the film and geometric variables have. In referencing one of my resources, a higher end X-ray tube rated at 400-450 kV could theoretically penetrate thickness up to roughly 300 mm. The lower limit for 50 kV is approximately 20 mm.
I usually work with castings from 30 mm to approximately 75 mm, although, I primarily use digital radiography using a CMOS detector.
A generally accepted method of ensuring acceptability of a method is to demonstrate required sensitivity (i.e. hole-type or wire-type image quality indicators) per referencing code.
I have a colleague that is better accquainted with thinner materials. I will forward him your question and I will email you if I can clarify practical limits.
On Wed, Jan 21, 2009 at 10:50 PM, Muhammed Ibrahim <firstname.lastname@example.org> wrote:
I have a query regarding the radiography of aluminium.
X-ray or gamma ray is better for aluminium?
If x ray is better , what is the thickness range it can be done?
If gamma ray is better , what is the thickness range it can be done?
If anybody having the procedure, please forward
Thanks & Regards
Muhammed Ibrahim PK
Rajesh B. Shetty
With Warm regards,
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete
this e-mail and destroy any copies.
Any dissemination or use of this information by a person other
than the intended recipient is unauthorized and may be illegal.
To post to this group, send email to email@example.com
To unsubscribe from this group, send email to firstname.lastname@example.org
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.