RE: [MW:14568] NACE MR 0175 Requriement / Marking on Product

 

Hi Vino,

 

Please see below the requirements for product marking as specified in MR-0175/ISO 1516-2, 2009 edition. If you're following the earlier (2003) version, there's slight difference in the language of text.However the the end statement is , the traceability should be either by marking on the product or statement mentioned  with the supplied documentation.

 

Thanks.

 

 

Pradip Goswami,P.Eng.IWE

Welding & Metallurgical Specialist

Ontario, Canada.

Email-pgoswami@sympatico.ca,

pgoswami@quickclic.net

 

ANSI/NACE MR0175/ISO 15156-2:2009(E)

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Vinayak Kale
Sent: Saturday, June 16, 2012 11:43 AM
To: materials-welding@googlegroups.com
Cc: materials-welding@googlegroups.com
Subject: Re: [MW:14567] NACE MR 0175 Requriement / Marking on Product

dear , if material is for NACE application , MTC shall recorded the statement as "" Material compliance with MR0175"

 

Product marking is depends  on client requirement , In general alphabet N use as suffix with material grade

Regards


Vinayak Kale
OGSP - QA & I , HC - Upstream
EPC Block , 2nd Floor , Gate No.1
Saki Vihar Rd. Powai Campus
Mumbai - 400072
Ph : + 91 022 6705 3969
(M) - 9987875309
www.larsen toubro.com

-----materials-welding@googlegroups.com wrote: -----

To: materials-welding@googlegroups.com
From: Vino Varghese
Sent by: materials-welding@googlegroups.com
Date: 06/16/2012 08:16PM
Subject: [MW:14566] NACE MR 0175 Requriement / Marking on Product

Dear Experts,

 

Can you please let me know where is the "PRODUCT MARKING" requirement specified in NACE for NACE procured materials.

Eg: ASME piping material refers to ASME A530.

 

Also, whether it is madatory to specify "NACE MR 0175" as product marking?

 

Thanks & Regards

Vino-Doha

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.